ESPresso Lite V2.0

Availability: Discontinued

Buy locally from a partner

Country:
Description
Note: Espresso Lite V2.0 is discountinued starting from 15th February 2019, please consider NodeMCU that provides similar functions with same processor.
 
* IoT Starter Kit with ESPresso Lite is available here, you get everything for you to kickstart.
 
Note: If you have difficulty getting the Espert IoT Mobile Apps, please check this tutorial out.

ESPresso Lite V2.0 is the first low-cost Arduino-compatible ESP8266 WiFi development board to be manufactured in Malaysia. Working together with ESPert, a Singapore IoT technology company, this board allows anyone to learn, experiment and build their IoT projects easily and quickly.

Cytron Technologies as the manufacturing partner is excited to announce the design of V2.0 is finalized and the pre-launch promotion is also ended. 1st batch of ESPresso Lite has been shipped out to customer early of March 2016.
 
The core hardware inside ESPresso Lite V2.0 is Espressif System's ESP8266 WROOM-02 WiFi module and is programable using the Arduino IDE like how anyone would run their programs in other Arduino boards.
 
ESPresso Lite V2.0 comes in a kit, with extra headers. You will have to fire up soldering station to solder some of the headers. Not to forget we recommend getting UC00A for USB to UART which you need to load program and future debugging purpose.
 
ESPert is working hard to prepare the tutorial to kick start your first IoT project with ESPresso Lite, please refer to the this tutorial to get started.
 
Please do visit ESPert.co for more information about this product.
 
Espresso Lite V2.0 Specs and Features:
  • Features Espressif System's ESP8266 WROOM-02 Wi-Fi module (with 4Mb flash)
  • Design for IoT with free espert.io cloud and app service
  • Support the Arduino IDE (boards manager) and libraries
  • Auto program loading from Arduino IDE, using UC00A (or other compatible USB to Serial)
  • Vin: 5 to 12VDC
  • Operating Voltage: 3.3VDC
  • On board 3.3V Voltage Regulator with maximum current of 800mA continuous, 1A peak
  • One Reset button, two User Programmable buttons
  • WROOM-02 module is FCC, CE & TELEC certified
  • Breadboard friendly breakout pins
  • Ready pads for I2C OLED panel
WROOM-02 Specs and Features:
  • Operating Voltage: 3.0 to 3.6VDC
  • Operating Current: Average = 80mA
  • IEEE 802.11b/g/n at 2.4 GHz
  • WiFi mode: SoftAP/Station/SoftAP + Station
  • Security: WPA/WPA2
  • Encrytion: WEP/TKIP/AES
  • Integrated low power 32-bit MCU
  • Integrated 10-bit ADC
  • Integrated TCP/IP protocol stack
  • Integrated TR switch, balun, LNA, power amplifier and matching network
  • Integrated PLL, regulators, and power management units
  • Various interfaces available, including SDIO, HSPI, UART, I2C, I2S, IR, PWM, GPIO, etc.
  • Supports antenna diversity
  • Deep sleep power <10uA, Power down leakage current < 5uA
  • Wake up and transmit packets in < 2ms
  • Standby power consumption of < 1.0mW (DTIM3)
  • +20dBm output power in 802.11b mode
  • Operating temperature range -40C ~ 125C
  • FCC, CE and TELEC certified

Documents:

Tutorials:

Warranty Period: 12 months
Resources
Getting Started Guide
ESP8266 Datasheet
Example of Espresso board with Oled
Fritzing Part
Q & A (14)

Ask a question

Reviews
  • 4.3 out of 5
                  
  • 5
    66.67%
  • 4
    0%
  • 3
    33.33%
  • 2
    0%
  • 1
    0%
Sort By:

Tags: espresso, Arduino, ESP8266, Espressif, IoT, wifi espresso-lite-2.0 v2.0