Your shopping cart is empty!
Aluminium Robot Chassis Complete Set
- Brands Cytron Code: HD-BSC-AL10
This Package supply in loose part. User need to assembly the motor and wheel to complete the robot base. The part include:
PLEASE REFER TO INSTRUCTION BEFORE BENDING!
Approximate Dimensions: 18.8cm x 18.2cm x 3.4cm (Aluminium Thickness, 1mm)
This robot base is fully compatible with these main controllers,
Sensors,
Motor driver board,
Additional PCB Stand and M3 screws/nuts may needed for parts assembly.
Part 1- Tutorial of Line Following Robot
How to develop Arduino Line Following Mobile Robot - Part 1
This set of line following mobile robot uses: 1️⃣ Aluminium Robot Chassis Complete Set https://www.cytron.io/p-hd-bsc-al10 2️⃣ Maker UNO https://www.cytron.io/p-maker-uno 3️⃣ LiPo Power Shield https://www.cytron.io/p-shield-lipo 4️⃣ LiPo Rechargeable Battery 3.7V 1300mAH https://www.cytron.io/p-lip-3.7-1300 5️⃣ 2A Motor Driver Shield https://www.cytron.io/p-shield-2amotor 6️⃣ Auto-Calibrating Line Sensor https://www.cytron.io/p-lss05 7️⃣ Male to Male Jumper Wire https://www.cytron.io/p-wr-jw-mm65 8️⃣ PCB Stand (screw & nut) 20mm https://www.cytron.io/.../c-39.../p-sd-sn-20
Part 2 - Tutorial of Line Following Robot
How to develop Arduino Line Following Mobile Robot - Part 2
This set of line following mobile robot uses: 1️⃣ Aluminium Robot Chassis Complete Set https://www.cytron.io/p-hd-bsc-al10 2️⃣ Maker UNO https://www.cytron.io/p-maker-uno 3️⃣ LiPo Power Shield https://www.cytron.io/p-shield-lipo 4️⃣ LiPo Rechargeable Battery 3.7V 1300mAH https://www.cytron.io/p-lip-3.7-1300 5️⃣ 2A Motor Driver Shield https://www.cytron.io/p-shield-2amotor 6️⃣ Auto-Calibrating Line Sensor https://www.cytron.io/p-lss05 7️⃣ Male to Male Jumper Wire https://www.cytron.io/p-wr-jw-mm65 8️⃣ PCB Stand (screw & nut) 20mm https://www.cytron.io/.../c-39.../p-sd-sn-20