Numicro ARM Cortex-M0 Training Kit

  • Brands Nuvoton Code: NU-LB-NUC140 MPN:
Availability: Discontinued

Buy locally from a partner

Country:
Description

Looking for 32-bit ARM achitecture microcontroller? Now we carry the NUC140 training kit. It is based on ARM Cortex-M0 Nuvoton NUC140 series of microcontroller.

NU-LB-NUC140 is training kit speacially designed for NuMicro NUC140 series. It comes with quite a number of devices for project development and verification. There is also onboard USB programmer that offers program loading and debug. Thus, users do not need other additional ICE or debug equipments. The kit comes with:

  • Nu-LB-NUC140 training board
  • USB Mini-B cable
  • CD

CD content:

  • Keil Evaluation version installer
  • Datasheet
  • User's Manual
  • USB driver

Features of Nu-LB-NUC140 training kit:

  • 32-bit ARM Cortex-M0 microcontroller from Nuvoton.
  • Premounted with NUC140VE3CN as the target microcontroller.
  • Comes with Nu-Link, USB programmer and debuger.
  • USB mini B receptor for USB device development.
  • Pre-mounted with 12MHz crystal(MCU system clock) and 32.768KHz crystal (real time clock).
  • Operating voltage: 5V
  • Input voltage: 5V from adapter or USB
  • ON/OFF button
  • RS232 (DB9 male) connector for serial port connection
  • 4 x 7-segment display
  • Buzzer
  • CAN
  • RS485
  • 128x64 Dot Matrix LCD
  • 3x3 Key Matrix
  • Varaible Resistor as ADC input
  • LEDs
  • I2C EEPROM
  • SPI serial Flash
  • WAU8822 Audio codec
  • MicroSD card slot
  • The USB programmer and debugger is compatible with IAR or Keil IDE.

Features and Specification of NUC140VE3CN:

Core
- Cortex™-M0 processor
- Max frequency of 50 MHz
- Operating voltage: 2.5V to 5.5V
- Temperature range: -40℃ ~ 85℃

Memory
- 128 KB of flash memory
- 16 KB of SRAM
- ISP (In-System Programming)
- ICP (In-Circuit Programming)

ADC
- Up to 8 channels
- 12-bit resolution
- Up to 800 kSPS
- ±1℃ accurate Temperature sensor 

PWM
- 8 x channel PWM or three complementary paired PWM outputs
- Period/duty trigger ADC function

Connectivity
- 1 x Bosch CAN 2.0b
- 1 x USB 2.0 Full Speed
- 4 x SPIs (up to 36 MHz)
- 2 x I²Cs (up to 400 kHz)
- 3 x UARTs (up to 1 Mbps)
- 16/8 bits EBI interface

Clock Control
- 4 to 24 MHz external crystal oscillator
- 22.1184 MHz internal RC oscillator (±1% accuracy at 25℃, 5V)

Package: LQFP 100 pin

Warranty Period: 12 months
Resources
NUC140VE3CN Datasheet
Nu-LB-NUC140 User's Manual
Nu-LB-NUC140 Schematic
Q & A (4)

Ask a question

Reviews
No Review Found

Tags: numicro, arm, cortex-m0, training, kit, development, tool nu-lb-nuc140